KAWASAKI 705-41-01620 PC Excavator Series Pump

Basic static load rating C0:50 kN; Fatigue load limit Pu:6 kN; Fw:35 mm; Reference speed:11000 r/min; Basic dynamic load rating C:29.2 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 35x42x4; Mass needle roller and cage assembly:0.037 kg; Ew:42 mm; Limitin

Da max.:154 mm; d2 ≈:120 mm; da min.:111 mm; Limiting speed:1300 r/min; Basic dynamic load rating C:475 kN; d:100 mm; r1,2 min.:2 mm; D:165 mm; Fatigue load limit Pu:71 kN; s2 max.:17.7 mm;

d1 ≈:24 mm; da max.:24 mm; Mass plain bearing:0.073 kg; α:6 °; D:35 mm; Basic static load rating C0:146 kN; Specific static load factor K0:500 N/mm²; ra max.:0.3 mm; B:24 mm; Lubricant:Regular relubricatio;

B:46.00 mm; Accessories:Two Seals; D:280.0000 mm; d:180.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:190000 N; Basic Static Radial Load Rating Co:200000 N; Sealed Speed Rating n3:1400 rpm; Oil Speed Rating Open/Shielded n2:2600 rpm; Grease Speed Rating Open/Shielded n1:2000 r

Calculation factor Y2:3.4; Basic dynamic load rating C:9596 kN; Ba min.:20 mm; r1,2 min.:7.5 mm; d1:530 mm; D:920 mm; B1:377 mm; K:12 mm; Limiting speed:630 r/min; Calculation factor e:0.3;

Appropriate attachment bolt size G:0.875 in; Initial grease fill:181.44 g; RG:3/8 NPT; PosiTrac Plus contact element:2 x B10724-113; P180°:57.4 kN; P90°:84.5 kN; N1:26.988 mm; Cap bolt:5/8-11 UNC; A1:111.125 mm; L:387.35 mm;

Basic Static Radial Load Rating Co:28500 N; Fillet Radius ra:1.50 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:39300 N; Grease Speed Rating Open/Shielded n1:7000 rpm; D:80.0000 mm; d:35.000 mm; B:21.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm;

Accessories:One Seal; Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Dynamic Radial Load Rating C:125000 N; B:35.00 mm; d:150.000 mm; Sealed Speed Rating n3:1700 rpm; D:225.0000 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:125000

d1:93.662 mm; Hydraulic nut:HMVC 22E; d:110 mm; B4:23.012 mm; B1:81.178 mm; Lock washer:W 22; B:20.091 mm; Mass adapter sleeve assembly:2.25 kg; d3 max.:145.39 mm; Threads per inch:12;

Nut for removalHM 30/500B2217 mmA9 mmd480 mmMass withdrawal sleeve34 kgB1205 mmG2G 1/4GTr 500x5Hydraulic nutHMV 100 EG138 mm

d:75.000 mm; B:25.00 mm; D:130.0000 mm; Grease Speed Rating Open/Shielded n1:3900 rpm; Basic Static Radial Load Rating Co:72000 N; Basic Dynamic Radial Load Rating C:74800 N; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Accessories:Two Shields;

B:40.00 mm; D:215.0000 mm; Fillet Radius ra:2.00 mm; d:120.000 mm; Basic Static Radial Load Rating Co:200000 N; Oil Speed Rating Open/Shielded n2:2800 rpm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:2300 rpm; Basic Dynamic Radial Load Rating C:172000 N;

da min.:497 mm; H:127 mm; Basic dynamic load rating C:6400 kN; B:45.9 mm; Mass bearing:158 kg; Da max.:271 mm; r3,4 min.:16 mm; Dynamic load rating C90:2230 kN; Industry reference:T921; Limiting speed:560 r/min;

Grease Speed Rating Open/Shielded n1:3700 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:114000 N; B:35.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; D:150.0000 mm; Basic Static Radial Load Rating Co:102000 N; Fillet Radius ra:2.00 mm; d:70.000 mm;

rb max.:4 mm; Reference speed:2000 r/min; Ca min.:10 mm; C:50 mm; Db min.:236 mm; Calculation factor Y0:0.8; Calculation factor e:0.44; D:245 mm; d1 ≈:204.25 mm; db min.:181 mm;